Home ProductsEmbedded Microphone

Boundary Layer Embedded Microphone / Fluntmount Condenser Microphone Cardioid Pattern

China VISSONIC ELECTRONICS LIMITED certification
China VISSONIC ELECTRONICS LIMITED certification
I have cooperated with this company for over 3 years, I like their products which is popular with our customers and trust their service.

—— David

I love the device, 5G wireless mic is great and convenient.It is signal stable, clear voice, and a long working time. This mics worked great at a large board meeting with 100 people in attendance. The meeting went smoothly, without any problems, and was easy to use

—— Judson Watts

We use this set in a small training room for about 18 people . The microphones are good quality and able to pick up voices clearly . Due to the acoustics in the room we do not leave all the mics on all the time but have the participants turn them on when they are speaking, then turn them off afterwards.

—— Villella

I'm Online Chat Now

Boundary Layer Embedded Microphone / Fluntmount Condenser Microphone Cardioid Pattern

Boundary Layer Embedded Microphone / Fluntmount Condenser Microphone Cardioid Pattern
Boundary Layer Embedded Microphone / Fluntmount Condenser Microphone Cardioid Pattern Boundary Layer Embedded Microphone / Fluntmount Condenser Microphone Cardioid Pattern Boundary Layer Embedded Microphone / Fluntmount Condenser Microphone Cardioid Pattern

Large Image :  Boundary Layer Embedded Microphone / Fluntmount Condenser Microphone Cardioid Pattern

Product Details:

Place of Origin: CHINA
Brand Name: VISSONIC
Certification: CE FCC
Model Number: VIS-BDY-F

Payment & Shipping Terms:

Minimum Order Quantity: 1
Packaging Details: Carton
Delivery Time: 5-8 working days
Payment Terms: T/T, Western Union
Supply Ability: 100000
Detailed Product Description
Mic Capsule: Electrostatic Capacitive Type Directivity Pattern: Cardioid
Frequency Response: 40-19,000 Hz Turn-on Sensitivity: -40 DB (10 MV) At 1V At 1 Pa
Impedance: 200 Ohm High Maximum: SPL 142 DB SPL, 1 KHz At 3% T.H.D.
Dynamic Range: (typical) 113 DB, 1 KHz At Highest Sound Pressure Level S / N: 65 DB, 1 KHz At 1 Pa
Phantom Power: DC 11-52V, Power Consumption 5.7 MA Typical
High Light:

conference room microphone

,

conference table microphone

CLEACON VIS-BDY-F Flush mount boundary Microphone
 
 
 
 
 
VIS-BDY-F is a built-in microphone that makes the microphone hide on the desktop when not in use. This is
achieved by simply pressing down on the top of the microphone until it locks. Then press the microphone again,
and the microphone will rise back to its original position. This microphone can be used in the CLEACON Full
digital network conference system through the VIS-AIB analog connection box, or it can be used in the analog
system, such as VIS-FS100-A automatic feedback suppressor, mixer, audio processor, etc.
Boundary Layer Embedded Microphone / Fluntmount Condenser Microphone Cardioid Pattern 0

 

Features:
 

1. Low profile on any desktop or surface
 
2. The microphone is equipped with a reed switch, which is designed to switch at the beginning and end of
each session when the microphone is no longer used. When the microphone is in the up position, the switch
contact is closed (ON), and when it is retracted, the switch will be OFF.
 
3. Capacitive touch button can be optionally installed to easily set the microphone off or on for sound pickup.
 
4. Cardioid pattern.
 
5. Built-in microphone preamp power supply module, no need to use external power supply module
 
6. The sturdy all-metal structure design provides two layers of steel mesh cover protection
 
7. The microphone works from DC 11V to 52V phantom power.
 
8. Output with 3-pin XLR or 3.5 Phoenix connector
 
9. Built-in ring-shaped LED status indicator
 
10. Built-in RF filter
 
11. Equipped with shock-proof isolators to reduce vibration noise on the installation surface
 
 
Specification
 
Mic capsule ........ electrostatic capacitive type
Directivity Pattern ........ Cardioid
Frequency response ........ 40-19,000 Hz
Turn-on sensitivity ........ -40 dB (10 mV) at 1V at 1 Pa
Impedance ........ 200 ohm
High maximum ........ SPL 142 dB SPL, 1 kHz at 3% T.H.D.
Dynamic range ........ (typical) 113 dB, 1 kHz at highest sound pressure level
S / N....... 65 dB, 1 kHz at 1 Pa
Phantom power ........ DC 11-52V, power consumption 5.7 mA typical
Switch Touch control ........ On / Mute
Weight ........ 65 g
Overall ........ length 84.8 mm, diameter 38.0 mm, maximum width 48.0 mm
Output terminal ........ Built-in 3-pin XLR
Standard configuration ........ 1 pair of shock-proof isolator



 
Item Model for Order
VIS-BDY-F ...Flush mount boundary Microphone
VIS-AIB ........ Analog microphone connection box
VIS-DCP2000-D .............. Full Digital Network DSP Conference System Controller
VIS-FS100-A .............. Fully automatic feedback suppressor
 
 
Boundary Layer Embedded Microphone / Fluntmount Condenser Microphone Cardioid Pattern 1
 
Boundary Layer Embedded Microphone / Fluntmount Condenser Microphone Cardioid Pattern 2Boundary Layer Embedded Microphone / Fluntmount Condenser Microphone Cardioid Pattern 3Boundary Layer Embedded Microphone / Fluntmount Condenser Microphone Cardioid Pattern 4

Contact Details
VISSONIC ELECTRONICS LIMITED

Contact Person: Sandy

Send your inquiry directly to us (0 / 3000)